Oracle 10g Abnormal Program Termination On Windows 2008 R2

Q-: Oracle 10g Abnormal Program Termination On Windows 2008 R2
SAP ECC 6.0 DEV and PROD servers on Windows 2003 with Oracle 10.2 database.
My client purchased windows 2008 R2 with new hardware Itanium processor, i have to migrate windows 2003 OS to Windows 2008.
On new server, I plan to perform system copy.
I installed Windows 2008 R2 on new server and j2sdk. Then I tried to install Oracle 10.2 from Oracle dump -> C:\TEMP\NT\IA64
I am getting error after entering drive letter and SID,
Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle support: " unknown"
Sol-: download the IA64 media? Look for SAP Note 986578 - Oracle support in Itanium 2 systems (Montecito & following), I do not know if this applies to Windows but at least in Linux depending on the architecture you need whether to use IBM JDK (x86_64 or x64) or Sun JDK (IA64).
Another thing-:
Your client's management is seemingly not aware that IA64 is dying off? Are they good to go for another platform switch, 2 years from now?
http://scn.sap.com/thread/1920954
http://blogs.technet.com/b/windowsserver/archive/2 010/04/02/windows-server-2008-r2-to-phase-out-itanium.aspx.

Oracle 10g Abnormal Program Termination On Windows 2008 R2

Q-: Oracle 10g Abnormal Program Termination On Windows 2008 R2
SAP ECC 6.0 DEV and PROD servers on Windows 2003 with Oracle 10.2 database.
My client purchased windows 2008 R2 with new hardware Itanium processor, i have to migrate windows 2003 OS to Windows 2008.
On new server, I plan to perform system copy.
I installed Windows 2008 R2 on new server and j2sdk. Then I tried to install Oracle 10.2 from Oracle dump -> C:\TEMP\NT\IA64
I am getting error after entering drive letter and SID,
Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle support: " unknown"
Sol-: download the IA64 media? Look for SAP Note 986578 - Oracle support in Itanium 2 systems (Montecito & following), I do not know if this applies to Windows but at least in Linux depending on the architecture you need whether to use IBM JDK (x86_64 or x64) or Sun JDK (IA64).
Another thing-:
Your client's management is seemingly not aware that IA64 is dying off? Are they good to go for another platform switch, 2 years from now?
http://scn.sap.com/thread/1920954
http://blogs.technet.com/b/windowsserver/archive/2 010/04/02/windows-server-2008-r2-to-phase-out-itanium.aspx.

Error when installing Solman7.1 with AIX+oracle

Q-: Why this error accur when we installing solman7.1 with AIX
New error: sapinst.log
INFO 2012-06-22 23:25:47.614
Execute step fillContextProduct of component |NW_Onehost|ind|ind|ind|ind|0|0
ERROR 2012-06-22 23:26:01.270
FJS-00003 invalid return (in script NW_Onehost|ind|ind|ind|ind, line 200469: return ( NW_Onehost_ind_ind_ind_ind( functionName , isValidator ) ); )
ERROR 2012-06-22 23:26:01.302
FJS-00011 Error compiling script.
ERROR 2012-06-22 23:26:04.190
FCO-00011 The step fillContextProduct with step key |NW_Onehost|ind|ind|ind|ind|0|0|fillContextProduct was executed with status ERROR ( Last error reported by the step
: invalid return (in script NW_Onehost|ind|ind|ind|ind, line 200469: return ( NW_Onehost_ind_ind_ind_ind( functionName , isValidator ) ); )).
INFO 2012-06-22 23:26:04.968
Creating file /oracle/sapinst_instdir/SOLMAN71SR1/SYSTEM/ORA/CENT RAL/AS/__instana_tmp.xml.
Sol-: You have to set the recommended OS kernel parameter (check your OS procedure) also set java environment parameters and test with java -version command if java is working under the user used to install oracle...basic prerequisite for OS administration part.
If you done these steps-:
temporarily shifted sapinst_dir under the oracle as default directory tmp got full. I ran pre-requisite checker and got two error as follow but I assumed its not relevant to this particular issue.
1. Environment variable (CPIC_MAX_CONV) =condition not met <
2. JAVA_HOME = Could not check <
You have need to remember this step when using java that what version and use parameter accordingly
you use the right java, in this case is JDK 1.4.2 downloaded from IBM, as far as I know. Also need to read the OS related notes as asep818 said in order to set the correct kernel parameters.

Solman7.1, AIX 6.1, Oracle 11g Installation

I'm working on Solman7.1, AIX 6.1, Oracle 11g installation, Upon adding parameters in Default profile, I activated it. (I checked the Consistency in Profiles) When try to restart the system, it comes with Database needs to be started first. Then I looked into the Default Profile, its shows the logs and doesn't hold any parameters.. (all are commented out).
Need your thoughts on this. Sample of the default profile as follows: #Created during Solman install -Vj 08062012 #parameter created by: RZP60K 06/08/2012 15:04:30 rdisp/gui_auto_logout = 1800 #Created during Solman install -Vj 08062012 #parameter created by: RZP60K 06/08/2012 14:56:16 rdisp/buffermode = sendoff,exeauto #Created during Solman install -Vj 08062012 #parameter created by: RZP60K 06/08/2012 11:51:16 #parameter deactivated by: RZP60K 06/08/2012 12:03:42

Incorrect time zone In Sap System

System was set in a incorrect time zone. How can I change it back?
Use T-code STZAC.
How can we delete the entries from DBTABLOG using RSTBPDEL report, it is not delete any records, even i tried we Dialog mode and background mode also. But it is not deleting any record from dbtablog table.
1. Check you have the right authority to delete the records 2. Make sure you have the variant specifications correct as regards date fields, try using a dynamic variant by date or specify a specific table.
3. Try RSTBCOUNT to check the content and discover which tables contribute the highest change logs
Query-: I want to do the settings in SR13 as per the language I have logged in: eg: If I have logged in through Eng language, online manual should open with eng If I have logged in through dutch language, online manual should open with dutch. Current settings are for Eng lang, I tried to maintain setting for dutch language. But its giving me following error :
E:H2:718 WIN32 How can it be done?
Ans-: just add an entry in SR13, but put the Lagnauge Field to DE and adapt the URL/link accordingly. Q-: Why this error accur
Cannot find PDL type for output device '(Printer name)'
Ans-: Its depend on Host Access type? 'F' or 'G' if you are using G then change it with F or if using F then change it with G
Q-: We are using SAP ECC6 with EHP 4 with SAP GUI 7.2. we have a strange problem with many users (Not All).
Session of few users auto logout after few minutes if remain idle. However this is not happening with many other users. We have checked with our basis and network team and they have not set any auto logout policy. This is happening with only few users and most of the users remain logged in even after being idle for hours. We are on windows 7.
Ans-: Asking different affected users, is the length of the 'idle time' consistent before the disconnect message (i.e. always 5 minutes) or does it vary (sometimes 5 minutes, sometimes 15 minutes, sometimes 30 minutes,
2-: check logs in work directory
If you want to find ping or tracert to IP address of sap server. If there is a loss in packet it will show you RTO.