upgrade ECC6.0 EHP1 Ready to ECC6.0 EHP4 | SAP GUI 7.1 to 7.2

Q-: Need to upgrade ECC6.0 EHP1 Ready to ECC6.0 EHP4. Did I use EHPInstaller or SAPUp?

Ans-: Use EHPinstaller tool to upgrade to EHP4.

Query-: Web Gui take more memory then not gui client

Both network allow me, but my question is like a sap router string we use to connect sap server. Like this I want connect and my current string of web gui is:

http://sapdevail:8000/sap/bc/gui/sap/its/test/webg ui_tj?sap-client
0

Now where I give router string or my static ip.


Solution-: 1- Your router string looks like it is missing something like a /h/dns-name
or /hIP-ADDRESS
2-: You can access from another network as long as the network firewall allows SAP traffic.


Q-: Explain what is the look of router id and how can you use the web string
Ans-: /H/124.247.208.216/s/3299/H/

Q-: if you installed WEBSAPGUI 7.10 patch 9 on a Windows 2008 R2 64-bit machine using a IIS 7 web service and strictly followed the manual on how to install it.

After tried to access the Web Console using http:///isapi_sapcnsl.dll. The browser prompts me to download the isapi_sapcnsl.dll file which of course shouldn't.


Q-:
My users cannot print in SAP after upgrade from SAP GUI 7.1 to 7.2. There is no error.?

You should have a look at method "G" or "C" instead to print

More info about method G at http://help.sap.com/saphelp_nw70/helpdata/en/42/dd 174f02302cede10000000a1553f7/content.htm

Q-: I have to refresh the QAS with a copy of PRD SAP Enterprise Portal. The O/S is Windows. Can I execute the brrestore in Windows to restore a PRD backup? How can I execute the restore?

sol-: Find the homogeneous system copy guide for your particular version and follow the procedure there. I don't believe that you can perform a restore as this is a Java instance. You will need to export the PRD system by following the procedure in the guide and then perform an installation suing the export .

If your system is a dual stack version then you can use the ABAP portions' backup and restore for the ABAP side only but will still have to do the export of the Java side.

2-: You can refresh a JAVA stack using a backup/restore... but the only supported way is through a SAP export and import. As stated by Al Fournier, the homogeneous system copy guide explains it all.

If you don't care about SAP's support, try to get a document called "An expert guide to successfully managing & executing Java system copy processes" by Sanjeev Gholap from BearingPoint.


Q-:
sap system has became slow. Now i am getting TIME_OUT error in ST22. The program 'SAPLSETRAN' has exceed MAXIMUM permitted runtime without interruption

How to analysis the issue.

Q-: SAP BI Reports and need to get the URL of them can we use crome browser?

Ans-: no, Chrome is not a supported browser for SAP products, yet.

SAP ECC 5 on MS SQL Database server to SAP ECC 5 on Oracle database server

Query-:
Moving our SAP ECC 5 on MS SQL Database server to SAP ECC 5 on Oracle database server is good.


Performance-wise, you should get a bout the same throughput.clients want to migration from Oracle to MS-SQL... not the other way around. All new clients I know go with MS-SQL or DB2. I don't see companies going to Oracle for new installations.

in this case, company has good Oracle knowledge. Check how much it will cost your more using ORacle versus training your ORacle team to use Ms-SQL.

Q-:Backup/restore method from PRD to QAS. because our QAS doesn't have new data to test. Current src & trg syst is
source = ECC6 PRD [SP level 19 & kernal level 185] + win2003 sp2 + mssql2005 sp2
target = ECC6 PRD [SP level 19 & kernal level 185] + win2003 sp1 + mssql2005 sp1

what we can for this problem

1-:can i take backup frm src & restore directly to trg OR i have to apply the SP's of win & mssql to trg & then restore?
2.my backup of mssql is going to be night backup, so no user would be logged and am gonna take simple recovery mode with full, so two files will get backup; .MDF & .LDF, other than this any other files necessary to restore
3.if restore is success, what is the next step,i mean how to log into ECC6 syst and other steps.
Sol-: Follow the steps in the System copy Guide and in SAP Notes 151603 and maybe you also need 551915.
You should patch the SQL Server before performing the copy.

Another Option-: However if you stop SAP and perform a backup, you have an offline backup.

Do not change the system to simple mode and you can restore the transaction logs to a point-in-time.

Transport Requests Between Different Transport Systems|Sap Router

Query-:We installed the SAP Router and have started it as a NT Service. However when I go to SM59 and test for remote connections, I get an error message: ERPSOLMAN:Route permission denied.ERS to 194.39.131.34.sapdp99).

At my OSS1 Tx when i test for my Lo on i get an error message:
erpsolman:ROUTE PERMISSION DENIED:(ERS TO 194.39./131.34.SAPDP99)


Sol-:
The SAPROUTTAB is not configured correctly.

However you should get the error with Tx OSS1.

Note 169924 - OSS_Connection trouble shooting. Hopefully this should resolve the problem.

Query-:DIR_TRANS must be shared between all system.
and you must give the access right to all {SID}adm user to all content to this dir.
For all the systems that are in one Group you shuld have a single Transport directory so your DIR_TRANS should be pointing to that shared transport directory.


Sol-: You can configure TMS to transfer transport requests between Different transport systems.

Our production systems do not share the Transport Directory. In the import Queue is a green arrow indicating that the data and cofiles need to be copied.


When I am trying to maintain a "zxxx" table through SM30 in Quality I am getting "Client 200 has status 'not modifiable'" and getting the "Message no. TK430"

It's not recommended to make changes on quality, otherwise your systems will no longer lined up. You have to apply changes on DC1 and transport them to QAS and after that to prod.

another solution
Problem can be solved by following snote#301665.
In the live system, set the "Current settings" (CURSETTING) indicator in the OBJH table for the detailed screen of the overhead rates, the V_KONX view. Depending on your release, proceed as follows:

As of Release 4.6
As of Release 4.6, you can set the "Current settings" indicator for the V_KONX view directly. To do this, call transaction SOBJ and select the V_KONX object. Select "Details" (magnifying glass, F2) for the V_KONX object. Select the "Current settings" indicator on the detail screen in the "Derived attributes" group box and save this setting. Transfer this change to the OBJH table in the live system.
Reset the 'Current settings' indicator in a client that is not flagged as live, since the indicator prevents the inclusion of the add-ons in a transfer order (if the corrections from Notes 709504, 733777 and 820955 have been implemented in the system).

Query-:

one of the Ecc6.0 server has been infected by virus.After removing the viruses,Sap instance is not starting.In mmc it theres error showing:
sapcpe couldnot start
strdbs.cmd could not be started.
Below is the log of sapstart.log

AP-R/3-Startup Program
Starting at 2011/06/07 16:45:51
Startup Profile: "c:\usr\sap\qas\sys\profile\START_DVEBMGS00_ECC6QAS "
Starting Programs
(4748) CreateProcess(\\ECC6QAS\sapmnt\QAS\SYS\exe\nuc\NTI 386\sapcpe.EXE pf=\\ECC6QAS\sapmnt\QAS\SYS\profile\QAS_DVEBMGS00_ ECC6QAS) failed(67). ERROR_BAD_NET_NAME: The network name cannot be found.
(4748) CreateProcess(\\ECC6QAS\sapmnt\QAS\SYS\exe\nuc\NTI 386\strdbs.cmd QAS) failed(67). ERROR_BAD_NET_NAME: The network name cannot be found.
(5476) CreateProcess: C:\usr\sap\QAS\DVEBMGS00\exe\msg_server.EXE pf=\\ECC6QAS\sapmnt\QAS\SYS\profile\QAS_DVEBMGS00_ ECC6QAS
(5160) CreateProcess: C:\usr\sap\QAS\DVEBMGS00\exe\disp+work.EXE pf=\\ECC6QAS\sapmnt\QAS\SYS\profile\QAS_DVEBMGS00_ ECC6QAS
(1580) CreateProcess: C:\usr\sap\QAS\DVEBMGS00\exe\igswd.EXE -mode=profile pf=\\ECC6QAS\sapmnt\QAS\SYS\profile\QAS_DVEBMGS00_ ECC6QAS

sap folder is having share name saploc and i can access through network.Whereas in the errorlog it shows CreateProcess(\\ECC6QAS\sapmnt\QAS\SYS\exe\nuc\NTI 386\sapcpe.EXE .
under exe i have the folder named UC then why its looking for nuc...no idea.
O.S= WIN2000
DB= ORACLE 10g

solution-:
you have to restore all passwords (OS and Oracle) with your old defined password.
From the error message i must be the principal reason for this error.

also check if users are locked and check their permissions.